Deerma C50s Ultra
Robot designed for automated cleaning of windows and smooth vertical surfaces. It uses a double-rotation circular design system that exerts constant friction on the glass, allowing dirt to be removed in hard-to-reach areas autonomously.
Motor and suction capacity
Equipped with a 72W brushless motor, it generates a vacuum pressure of 3100 Pa. This power ensures stable adhesion to the surface with a torsional torque of 20 kgf-cm, allowing the mops to rotate with the pressure needed to loosen stains without compromising energy efficiency. Its structure is only 77 mm thick, which allows it to be used on windows with shutters or security grilles where space is limited. It operates with a noise level of less than 68 dB.
Bi-directional ultrasonic spraying
Unlike models with a single ejector, this device incorporates Double-sided Atomization technology. The system shoots microparticles of water in both directions of travel, keeping the microfiber mops moist throughout the cleaning cycle. It has a 50 ml tank compatible with purified water or specific cleaning liquids for windows.
Navigation and on-board sensors
The robot cleans at a speed of 3 minutes per square meter. Its trajectory algorithm is designed to superimpose passages and avoid drying marks. It incorporates vacuum sensors at the base that detect edges, allowing its use on frameless glass, mirrors or shower screens; By detecting a loss of pressure at the edge of the surface, the system stops the advance and automatically changes direction.
Control Modes
The device has an automatic cleaning mode that optimizes the work path. With the included remote control, it is possible to manage the steering manually, force the water spray or insist on areas with embedded dirt.
Security and UPS system
To prevent falls in the event of a power outage, it incorporates a 650 mAh lithium polymer UPS (uninterruptible power supply) battery. In the event of an interruption in the power supply, the robot maintains suction on the glass for 15 to 20 minutes while emitting a safety audible alert. The anchor is complemented by a physical safety rope and a threaded power connector to prevent accidental disconnections.
Maintenance and consumables
With a weight of 1.54 kg, the device is easy to handle. It comes with a kit of 12 high-density, washable and reusable microfiber mops, which guarantees a long operational life from the first use.
Key Points
Benefits
- Double atomization: Maintains consistent moisture of the mops in both directions of movement.
- Slim design: 77 mm profile suitable for narrow spaces between glass and shutter.
- Battery backup: UPS system that prevents falls for 15 to 20 minutes after a power outage.
- Accessory Pack: Includes 12 microfiber cloths.
Cons
- Corners: Due to its circular design, it does not reach the 90-degree angle in the corners of the frames.
- Wired Power Supply: Requires to be connected to the power grid to operate; The battery life is exclusively dedicated to safety.
